Yesterday a local farmer got the Royal treatment with our 13 ft Catros minimum tillage tool!
Royal, Illinois is just 6 miles north of our headquarters in Ogden, Illinois. After stopping in last week and asking about some of our different tillage options, we decided to give him a demonstration of what the AMAZONE Catros could do for him on his 6 acre plot of fallow land. His plan is to enroll this land into CRP conservation using flowers, oats and barley. Needless to say, he was very impressed with the final product!
It is becoming a phenomenon! This hardworking little ATV trailer that can hold up to 2000 lbs is flying out the door from Maine to California, Florida to Alaska and everywhere in between! This one is actually headed up to Alaska right now!
If you haven't seen or heard of these robust ATV trailers, you need to look into them.
The MUTS Trailers are 37 inches to the top of the box, making them a low profile and very stable trailer. The pulley masts can be removed or folded down into the box in seconds to give the entire trailer a low profile.
These trailers are made from high quality North American materials! The MUTS box is made from 16 gauge galv-annealed automotive grade steel containing rust inhibitors with a hard, microscopically rough surface to which the powder coat can adhere to extremely well giving it excellent wear and rust resistance characteristics.
The bolt together approach allows the trailer to be shipped at lower cost with less potential damage during transport. The assembled trailer can flex without breaking any welds. Damaged components can be removed and repaired or replaced keeping maintenance costs low. Some parts can be removed to accommodate specific user needs. All nuts have nylon inserts so they will not vibrate loose.
MUTS ATV Trailer
The MUTS Trailers are 37 inches to the top of the box, making them a low profile and very stable trailer. The pulley masts can be removed or folded down into the box in seconds to give the entire trailer a low profile. (Shipping will be billed separately.)
Log Skidder Kit
Need to skid logs? Convert the MUTS trailer into a log skidder in about 4 minutes. Quick and easy and a fraction of the cost of dedicated log skidders. Can handle logs up to 18″ in diameter. (Shipping will be billed separately.)
Almost double the volume of your MUTS Trailer by adding a wall extension set. Ideal for hauling lighter materials such as leaves, wood chips, manure, brush, etc. (Shipping will be billed separately.)
Easily attach a chainsaw holder anywhere along the lip of your MUTS Trailer. The chainsaw holder will take a wide variety of chainsaw sizes. Be sure to secure to your chainsaw back plate with a bungee cord. (Shipping will be billed separately.)
The AEB Extend a Bar will add 18″ to the length of the drawbar. This allows longer material to be transported more easily. The additional length prevents impacts of some ATV’s/UTV’s which have deeply recessed hitches with the MUTS Trailer during tight turns. It makes backing up a little easier.(Shipping will be billed separately.)
Fuel Can Holder
The fuel can holder also attaches anywhere along the trailer lip. It is adjustable in height and width to accommodate a variety of small fuel and oil containers. The fuel can holder can also be used to hold some sealable containers (kitty litter pail) for carrying tools, first aid kit, emergency supplies etc. (Shipping will be billed separately.)
Rake and/or Shovel Holder
Carry your rake, shovel, axe, weed eater and more with this holder. It can be used in a variety of combinations. Use the bottom pieces only for a single tool or both bottom and top for 2 tools.
Adjust the width to suit handle length and adjust the tension to accommodate differing handle diameters and shapes. This option can be mounted anywhere along the front, back, or sides of the trailer’s lip. (Shipping will be billed separately.)
Rear Ball Hitch
Got a long haul ahead of you? Increase your efficiency by using a rear ball hitch. Pull a second trailer behind your MUTS Trailer; or a wood splitter, wood chipper, or anything else on wheels you can easily pull with your ATV. (Shipping will be billed separately.)
About a month ago we took a trip out west with a wonderful little piece of machinery, the AMAZONE ZA-TS! We had a customer that had to have it, and we were more than happy to oblige. The trip was long, but well worth it.
At that time there were a number of people present, both dealers and farmers, to check out this new machine! It was impressive, especially on the back of a Case IH Quadtrac Row Crop! He was so impressed that a couple of weeks later he decided to have a barbecue and invite all of his friends over to check it out and tell them why they needed one, too!
We are very excited about AMAZONE in the USA and can't wait for the machines to start traveling out west! If you are interested in more information on the ZA-TS:
On the road and talking about quality farm equipment and different farming practices... that is my passion!